States / Illinois / Elk Grove Village

Elk Grove Village, IL grease trap & interceptor requirements

Program run by Village of Elk Grove Village & MWRD. Hand-checked against source Last checked 2026-10-17. Report an error / rule changed

Quick answer

From the official source(s) below, last checked 2026-10-17. Rules change; verify with your city.

Need a pump-out? See 4 pumping companies serving Elk Grove Village ↓

Rules change; verify with your city. Summaries are plain-English restatements of the official source linked below; “Source says” shows the exact wording. Blank rows mean the sources we checked did not state that rule, not that there is no rule.

Required trap / interceptor type
Village Code 7-5-3: preliminary treatment is required where the Village or the treatment authority deems it necessary, and the Village adopts the MWRD Sewage and Waste Control Ordinance by reference.
Village Code 7-5-4: wastes must be substantially free of oils and grease, and grease that obstructs sewers is prohibited.
MWRD Sewage and Waste Control Ordinance: discharges to MWRD sewers may not exceed 250 mg/L total fats, oils and greases (FOG).
Illinois Plumbing Code (77 Ill. Adm. Code 890.510): commercial kitchens must have a grease interceptor with all grease-carrying fixtures directed to it; food waste disposers may not discharge into it, and water-cooled interceptors are prohibited.
✓ checked against source
Sizing rule
Illinois Plumbing Code minimum: the interceptor must hold at least half the liquid capacity of the connected fixtures on the same floor (60% if it sits on a floor below); fixture capacity in gallons = length × width × depth in inches ÷ 231.
✓ checked against source
Pumping / cleaning frequency
No fixed pump-out interval appears in the sources we checked; the MWRD ordinance prohibits adding physical, chemical or biological agents to grease traps or other pretreatment devices to resuspend, dissolve or emulsify grease.
✓ checked against source
Permit required?Not stated in the sources we checked
Permit & program feesNot stated in the sources we checked
InspectionsNot stated in the sources we checked
Record keepingNot stated in the sources we checked
Pumper / hauler approvalNot stated in the sources we checked
Reporting portalNot stated in the sources we checked
Fines & penalties
Village Code 7-5-6: $1,000 to $10,000 per offense, each day a separate offense, plus cleanup costs.
✓ checked against source
Program contactNot stated in the sources we checked

Sources

Grease trap pumping companies in Elk Grove Village, IL

4 companies that say on their own website they serve Elk Grove Village. Free listings are sorted A–Z. A listing is not an endorsement.

Before you book: ask for a full pump-out (not a skim) and a signed manifest for every service, and keep it on site for inspectors.

All Illinois pumpersNational directoryRun a pumping company? List it free

Size your interceptor

Use the grease interceptor sizing calculator (UPC, IPC and PDI methods), then confirm Elk Grove Village's own minimums above. Not sure how often to pump? Read how often to pump a grease trap.

Other Illinois programs

Arlington HeightsAuroraBloomingtonChampaignChicagoCiceroDecaturDes PlainesDowners GroveEdwardsvilleElginElmhurst

Grease rule changes, once a week

A short email when a city changes its FOG ordinance, pumping schedule, permit fees or reporting portal. Free.