Rockford, IL grease trap & interceptor requirements
Program run by Four Rivers Sanitation Authority (formerly Rock River Water Reclamation District). Hand-checked against source Last checked 2026-10-17. Report an error / rule changed
Quick answer
- How often to pump: not stated in the sources we checked
- Interceptor minimum / sizing: Minimum 1,000 gal / 1,500 gal
- Permit / fees: Permit required; fees listed: $300
Rules change; verify with your city. Summaries are plain-English restatements of the official source linked below; “Source says” shows the exact wording. Blank rows mean the sources we checked did not state that rule, not that there is no rule.
| Required trap / interceptor type | Source says: “Multiple tenant strip malls shall install an exterior grease interceptor, properly sized pursuant to Title 2, Article II, Section 8.A.5.” |
|---|---|
| Sizing rule | New or altered food service establishments that discharge FOG in quantities large enough to block lines must install a minimum 1,000-gallon interceptor; strip-mall interceptors may be no less than 1,500 gallons. âś“ checked against source |
| Pumping / cleaning frequency | Not stated in the sources we checked |
| Permit required? | A Food Service Establishment (FSE) permit is required; requirements are based on the grease-producing fixtures. âś“ checked against source |
| Permit & program fees | $300 FSE permit application cost. âś“ checked against source |
| Inspections | Not stated in the sources we checked |
| Record keeping | Not stated in the sources we checked |
| Pumper / hauler approval | Not stated in the sources we checked |
| Reporting portal | Not stated in the sources we checked |
| Fines & penalties | Not stated in the sources we checked |
| Program contact | [email protected] · (815) 387-7500 |
Sources
- https://fourrivers.illinois.gov/wp-content/uploads/2021/08/Industrial-Commercial-Sewer-Connection-Permit-Instructions.pdf · checked 2026-10-17
- https://fourrivers.illinois.gov/commercial-customers/food-service-restaurant-business-owners/ · checked 2026-10-17
Find a grease trap pumper in Rockford
Compare pumpers that service Rockford. Directory coming soon.
Get notifiedPump grease traps in Rockford?
Put your company in front of restaurants checking these rules. Featured listing (paid) – coming soon.
List your companySize your interceptor
Use the grease interceptor sizing calculator (UPC, IPC and PDI methods), then confirm Rockford's own minimums above. Not sure how often to pump? Read how often to pump a grease trap.
Other Illinois programs
Grease rule changes, once a week
A short email when a city changes its FOG ordinance, pumping schedule, permit fees or reporting portal. Free.