States / North Carolina / Greensboro

Greensboro, NC grease trap requirements

Program run by City of Greensboro Water Resources Department. Hand-checked against source Last verified 2026-10-18 by Stew Israil, GreaseTrapRules. Report an error / rule changed

Quick answer

From the official source(s) below, last checked 2026-10-18. Rules change; verify with your city.

Rules change; verify with your city. Summaries are plain-English restatements of the official source linked below; “Source says” shows the exact wording. Blank rows mean the sources we checked did not state that rule, not that there is no rule.

Greensboro grease trap rules at a glance

Grease trap and FOG (fats, oils and grease) rules for restaurants in Greensboro are set by City of Greensboro Water Resources Department. Pumping: no fixed interval stated; the city advocates the 25% rule. Sizing: minimum 1,000 gal (exterior interceptor).

Of the 4 North Carolina programs we track, 3 state a pumping schedule and 1 requires a permit. We have not verified a pumping company for Greensboro yet; see North Carolina pumping companies. Compare all North Carolina cities.

Greensboro grease trap & interceptor rules, line by line

Required trap / interceptor type
New food service establishments must install an appropriately sized grease retention unit per the International Plumbing Code; existing facilities with frequent grease backups will be required to install one.
✓ checked against source
Sizing rule
An exterior grease interceptor has a minimum capacity of 1,000 gallons; under-counter grease traps are usually limited to four fixtures and 50 gallons per minute combined.
✓ checked against source
Pumping / cleaning frequency
The city advocates the 25 percent rule and suggests setting cleaning frequency so floatables and solids do not exceed 20 percent of total liquid depth.
✓ checked against source
Permit required?Not stated in the sources we checked
Permit & program feesNot stated in the sources we checked
InspectionsNot stated in the sources we checked
Record keepingNot stated in the sources we checked
Pumper / hauler approvalNot stated in the sources we checked
Reporting portalNot stated in the sources we checked
Fines & penaltiesNot stated in the sources we checked
Program contact
336-373-2489
✓ checked against source

Sources

Grease trap cleaning & pumping companies in Greensboro, NC

No verified pumping company for Greensboro yet. Free listings are sorted A–Z. A listing is not an endorsement.

Before you book: ask for a full pump-out (not a skim) and a signed manifest for every service, and keep it on site for inspectors.

Try the North Carolina pumper list for companies serving nearby cities.

All North Carolina pumpersNational directoryRun a pumping company? List it free

Size your interceptor

Use the grease interceptor sizing calculator (UPC, IPC and PDI methods), then confirm Greensboro's own minimums above. Not sure how often to pump? Read how often to pump a grease trap.

Greensboro grease trap FAQ

How often do grease traps have to be pumped in Greensboro, NC?

Pump no fixed interval stated; the city advocates the 25% rule. Source: City of Greensboro Water Resources Department, checked 2026-10-18. Rules change; confirm with the local sewer authority.

What size grease interceptor is required in Greensboro?

Minimum 1,000 gal (exterior interceptor), per the official source. Your plumbing official can require more.

Who enforces grease trap rules in Greensboro, NC?

City of Greensboro Water Resources Department (program contact: 336-373-2489). Contact them for permits, inspections and approved haulers.

Nearby North Carolina cities

CharlotteRaleighWinston-Salem

Grease trap guides

How often to pumpThe 25% rule and city schedulesFOG inspection checklistWhat inspectors checkPrintable maintenance logPlus record-keeping rulesAll guidesSizing, trap vs interceptor, cost factors

Grease rule changes, once a week

A short email when a city changes its FOG ordinance, pumping schedule, permit fees or reporting portal. Free.