Ogden, UT grease trap requirements
Program run by Ogden City (Business License FOG requirements, GCD Maintenance Agreement). Hand-checked against source Last verified 2026-10-18 by Stew Israil, GreaseTrapRules. Report an error / rule changed
Quick answer
- How often to pump: At least every 3 months unless measured; before grease + solids exceed 25%
- Interceptor minimum / sizing: No minimum size stated in the sources we checked. Your local program or plumbing code sets it; estimate with the sizing calculator.
- Permit / fees: Not stated in the sources we checked. Ask Ogden City (Business License FOG requirements, GCD Maintenance Agreement) whether a FOG or wastewater permit applies.
Rules change; verify with your city. Summaries are plain-English restatements of the official source linked below; “Source says” shows the exact wording. Blank rows mean the sources we checked did not state that rule, not that there is no rule.
Ogden grease trap rules at a glance
Grease trap and FOG (fats, oils and grease) rules for restaurants in Ogden are set by Ogden City (Business License FOG requirements, GCD Maintenance Agreement). Pumping: at least every 3 months unless measured; before grease + solids exceed 25%.
Of the 3 Utah programs we track, 1 states a pumping schedule and 0 require a permit. We have not verified a pumping company for Ogden yet; see Utah pumping companies. Compare all Utah cities.
Ogden grease trap & interceptor rules, line by line
| Required trap / interceptor type | Not stated in the sources we checked |
|---|---|
| Sizing rule | Not stated in the sources we checked |
| Pumping / cleaning frequency | The grease control device must be serviced whenever floating grease plus settled solids exceed 25% of its hydraulic working capacity; owners who don't measure regularly must schedule pump-outs at least once every three (3) months. A variance is possible with proof that less frequent cleaning is enough. ✓ checked against source |
| Permit required? | Not stated in the sources we checked |
| Permit & program fees | Not stated in the sources we checked |
| Inspections | Not stated in the sources we checked |
| Record keeping | Not stated in the sources we checked |
| Pumper / hauler approval | Not stated in the sources we checked |
| Reporting portal | Not stated in the sources we checked |
| Fines & penalties | Not stated in the sources we checked |
| Program contact | Not stated in the sources we checked |
Sources
- https://www.ogdencity.gov/DocumentCenter/View/35057/Business-License-FOG-Requirements · checked 2026-10-18
Grease trap cleaning & pumping companies in Ogden, UT
No verified pumping company for Ogden yet. Free listings are sorted A–Z. A listing is not an endorsement.
Before you book: ask for a full pump-out (not a skim) and a signed manifest for every service, and keep it on site for inspectors.
Featured spot open. Be the first pumper restaurants see in Ogden. 3 of 3 spots left
Get featured
Try the Utah pumper list for companies serving nearby cities.
All Utah pumpersNational directoryRun a pumping company? List it free
Size your interceptor
Use the grease interceptor sizing calculator (UPC, IPC and PDI methods), then confirm Ogden's own minimums above. Not sure how often to pump? Read how often to pump a grease trap.
Ogden grease trap FAQ
How often do grease traps have to be pumped in Ogden, UT?
Pump at least every 3 months unless measured; before grease + solids exceed 25%. Source: Ogden City (Business License FOG requirements, GCD Maintenance Agreement), checked 2026-10-18. Rules change; confirm with the local sewer authority.
Who enforces grease trap rules in Ogden, UT?
Ogden City (Business License FOG requirements, GCD Maintenance Agreement). Contact them for permits, inspections and approved haulers.
Nearby Utah cities
Grease trap guides
Grease rule changes, once a week
A short email when a city changes its FOG ordinance, pumping schedule, permit fees or reporting portal. Free.