Provo, UT grease trap requirements
Program run by Provo City Public Works, Pretreatment Program (City Code 10.03.140). Hand-checked against source Last verified 2026-10-18 by Stew Israil, GreaseTrapRules. Report an error / rule changed
Quick answer
- How often to pump: The official sources we checked don't set a fixed schedule for Provo. Most programs require pumping before grease and solids reach 25% of the trap's depth (check yours). Confirm with Provo City Public Works, Pretreatment Program (City Code 10.03.140).
- Interceptor minimum / sizing: No minimum size stated in the sources we checked. Your local program or plumbing code sets it; estimate with the sizing calculator.
- Permit / fees: Not stated in the sources we checked. Ask Provo City Public Works, Pretreatment Program (City Code 10.03.140) whether a FOG or wastewater permit applies.
Rules change; verify with your city. Summaries are plain-English restatements of the official source linked below; “Source says” shows the exact wording. Blank rows mean the sources we checked did not state that rule, not that there is no rule.
Provo grease trap rules at a glance
Grease trap and FOG (fats, oils and grease) rules for restaurants in Provo are set by Provo City Public Works, Pretreatment Program (City Code 10.03.140). The official sources we checked do not set a fixed pumping interval for Provo, so plan on pumping before grease and solids reach 25% of the trap (the most common rule) and follow any schedule on your permit.
Of the 3 Utah programs we track, 1 states a pumping schedule and 0 require a permit. We have not verified a pumping company for Provo yet; see Utah pumping companies. Compare all Utah cities.
Provo grease trap & interceptor rules, line by line
| Required trap / interceptor type | Not stated in the sources we checked |
|---|---|
| Sizing rule | Not stated in the sources we checked |
| Pumping / cleaning frequency | Not stated in the sources we checked |
| Permit required? | Not stated in the sources we checked |
| Permit & program fees | Not stated in the sources we checked |
| Inspections | Owners must regularly inspect interceptors and provide inspection records on request; the City may inspect records or interceptors and set a deadline to clean a noncompliant interceptor. ✓ checked against source |
| Record keeping | Not stated in the sources we checked |
| Pumper / hauler approval | Not stated in the sources we checked |
| Reporting portal | Not stated in the sources we checked |
| Fines & penalties | Not stated in the sources we checked |
| Program contact | Not stated in the sources we checked |
Sources
- https://provo.municipal.codes/Code/10.03.140 · checked 2026-10-18
Grease trap cleaning & pumping companies in Provo, UT
No verified pumping company for Provo yet. Free listings are sorted A–Z. A listing is not an endorsement.
Before you book: ask for a full pump-out (not a skim) and a signed manifest for every service, and keep it on site for inspectors.
Featured spot open. Be the first pumper restaurants see in Provo. 3 of 3 spots left
Get featured
Try the Utah pumper list for companies serving nearby cities.
All Utah pumpersNational directoryRun a pumping company? List it free
Size your interceptor
Use the grease interceptor sizing calculator (UPC, IPC and PDI methods), then confirm Provo's own minimums above. Not sure how often to pump? Read how often to pump a grease trap.
Provo grease trap FAQ
Who enforces grease trap rules in Provo, UT?
Provo City Public Works, Pretreatment Program (City Code 10.03.140). Contact them for permits, inspections and approved haulers.
Nearby Utah cities
Grease trap guides
Grease rule changes, once a week
A short email when a city changes its FOG ordinance, pumping schedule, permit fees or reporting portal. Free.